Home > Miscellaneous > Other Machines Go Back
REQUEST PRICE VIEW MAP

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • ARKU
  • Model:
  • ARKU EDGEBREAKER 3000 2019,
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:

DESCRIPTION

Work pieces can also have burrs removed on both sides with the EdgeBreakerr plus machine option. Complicated turning of the components is eliminated. With the Plus version different type of grinding blocks can be used. The processing capabilities are thus extended. Tools are replaced simply and quickly, with the intelligent ARKU click-system. The type of processing can be widely adapted. Accordingly, different combinations can be run, such as top and bottom rounding with rounding blocks above and below or top and bottom burr removal with grinding blocks above and below, or a combination of the two. Due to sparks that are released while processing work pieces, a spark trap is imperative. Material With dry dust collection: Steel, stainless steel copper and various alloys With wet dust collection Aluminum and titanium Surface condition: Non-oil-treated flat-rolled products Material thickness Rounding unit:from 0.8 to 80 mm (0.031" to 3.15") Grinding unit: from 2 to 80 mm (0.079" to 3.15") Passage width: 1,300 mm (51") Min. dimensions (L X W): 180 x 100 mm (7.1" x 3.9") Max. part weight: Max. 250 kg/m (167 lbs/ft) How parts are fed: Manually or by optional transport conveyor belts Pass height: 940 mm (37") +/- 30 mm (1.2"), adjustable Pass direction: From left to right Feed rate: 0.2 to 6 m/min (0.66 to 19 ft./min) Electrical parameters: 3 phase x 480 VAC / 60 Hz Power: 25 kW Power supply: 80 Amps Ambient temperature: 41F to 104F (5C to 40C) Relative air humidity: Less than 80 % Machine weight: About 5,250 kg (11,600 lbs) *see technical description under paragraph.
+ request more information

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

SHARE PAGE

fdbdgbdgb fxnjmynhtbgvfcd

REQUEST MORE INFORMATION

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

You may also be interested in these Machines

    •
      Manufacturer:
      Model:
      Axcela CS7 carbide bandsaw blade
      Description:
      Robust carbide bandsaw blade for general applications. A variant of the proven AXCELA S for the substitution of competition products without change of application parameters. The innovative design of the AXCELA C-S7 allows a wide range of application...

      More Info

    • Manufacturer:
      Model:
      AXCELA STRIKER Carbide bandsaw blade
      Description:
      Carbide tipped bandsaw blade made for an extra wide range of applications and saws.

      More Info

    • Manufacturer:
      Model:
      Neomicro
      Description:
      The Neomicro permanent chuck with an exceptional holding force combines high quality with a favourable price. It is simple and low maintenance clamping device.. And is suitable primarily as an accessory to grinders intended for precise surface ...

      More Info

    • Manufacturer:
      Meywald
      Model:
      Meywald - GR01 (D212)
      Description:
      {"Brand": "Meywald", "Machine no": "D212", "Type": "GR01", "Clamping jaw": "", "Length": "130 mm", "Width": "60 mm", "Slot width": "22 mm", "Height": "70 mm", "Various in stock": ""}

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User