Specifications
Motion Package: Travel method: Stationary table X,Y and Z axis movement for cutting head
Control method: X,Y and Z simultaneous 3-Axis control
Drive motors: Fanuc AC Servo motors
Maximum sheet size (X,Y): 120" x 60"
Maximum axis travel (X,Y,Z): 121" x 61" x 3.93"
Maximum positioning speed (X,Y)
Per axis: 4,724 inches per minute
45 degree vector: 6,693 inches per minute
Maximum speed Z-axis: 4,724 inches per minute
Repeatability: +/- 0.0002"
Maximum material weight: 2,000 lbs.
Maximum material thickness
Mild steel: 1.0"
Stainless steel: 0.500"
Aluminum: 0.500"
Assist gas: 4 ports with NC Pressure control
Electrical requirements: 200V, 3 Phase, 60 Hz
Control:
Model: AMNC 3i Control
Control function: X,Y,Z axis simultaneous and focus lens, B-axis and laser
power control (CW, gated plus, pierce routines etc.)
Data storage: Compact flash drive
RI Rotary Index specifications:
Table shapes: Round, square, rectangular, angle and channel
Round tube: _" - 8.66"
Square tube: _" - 6"
Rectangle: 8.66"
Angle iron: 3.54"
C-Channel: 6"
Maximum weight: 441 lbs.
Maximum tube length: 236.2"
Rotation speed: 100 RPM
Dust collection: Automatic switching for tube length up to 236"
Scratch prevention: Controllable pneumatic chuck and aluminum
Fiber Laser resonator (Engine):
Model: AJ3000 with ENSIS Technology
Resonator style: LD Excited Yb fiber
CW output power: 3 KW
Laser Wavelength: 1.08 microns
Laser power mode selection: CW, gated pulse (CNC controlled)
Laser beam mode output: Multimode mode
Chiller water requirement: > or = 41 L/Minute
Electrical power consumption: 9kW
Equipped with:
AMNC 3i control
RI Rotary Index
Interlock enclosure
NC Assist gas
B-Axis NC focus
Integrated beam purge
150 mm lens, 190 mm lens
High speed cutting head
Active cut
Clean cut
Chiller
Dust Collector.
The RAS MiniBendCenter bends small parts up to 600 x 600 mm in small to medium
batch sizes. A optical scanner automatically finds the blanks on the pallet.
Fed with this data, a robot loads the small-part into the bending center.
After the automat...
Swivel clamping screw with smooth flat end. These screws are ideal for clamping irregular shaped workpieces. The screws are manufactured from SCM435(JIS) / 34CrMo4(DIN) heat treated to HRC 30 - 35 and the balls are manufactured from SCM21(JIS) / 34Cr...
Click on link below for Amada Brochure with specifications:
https://www.amada.com/america/brochures/general-fabrication/ID40IV-HP-
NT/html5/index.html?&locale=ENG
Mitee-Grip is a heat-activated wax-based compound embedded in precision paper, coated on nylon mesh or in a stick form. The original paper product is excellent for holding smooth, flat parts and maintaining parallelism.The mesh product captures addit...