Or
X axis travel 700mm.
Y axis travel 500mm.
Z axis travel 540mm.
Spindle centre to column (vertical milling) 547mm.
Spindle nose to table surface (or table centre) 60~600mm.
Height from table surface (or table centre) to floor 1085.5mm. Table work area 380mm.
Dimension of T-slot 12H7mm.
Max.
table load (rotary) 200Kg. Spindle taper BBT-40. Spindle motor(cont/30/10min) 7/11/15 kW.
Spindle speed 15000rpm.
Rapid feedrate – X/Y/Z 48/48/48 m /min.
Axis feed motor – X/Y/Z 4/4/7 kW. Cutting feedrate by table 20 m/min.
Linear guide width (X/Y/Z) 30 / 35 / 45 mm.
Ballscrew dia.
x pitch (X/Y/Z) 40 x 16 (X/Y/Z). Tilting (swivel)/rotary angles -20 ~30 / 360 deg. Rotary rapid feed rate 33.3 / 40rpm.
Axis feed motor 3 / 1.6 (A/C) kW.
Continuous indexing resolution 0.001 (roller cam drive) deg.
Continuous torque output 1060 / 588 (A/C) N-m.
Braked torque (clamping) 2452 / 2158 (by brake, A/C) N-m.
Max.
tool length 300mm.
Max.
tool weight 7Kg.
Magazine capacity 30.
Max.
tool diameter (without adjacent tools) 76(125)mm.
Tool exchange time 2.3 (T-T), 6.0 (C-C) sec.
Pull stud angle 15 (JIS 40P) deg.
Tool selection method – Random.
Fanuc 0i-MF Plus.
15” Colour display with QWERTY keypads.
Manual Guide I.
2GB CF Card.
AICC-3 (400 blocks).
VSS Macros (GUI).
IHMi.
15000 rpm DCS spindle (oil air lubricatedbearings by aT8/15000i motor).
Spindle oil cooler.
Air conditioner for electrical cabinet.
Through spindle coolant (MRT3-36, 20 bars/50hz with Mahle duplex filters).
Air through spindle.
Table shower.
Oil mist spray.
30 Tool magazine.
Twin screw chip removers.
High pressure coolant (Grundfos MTH 4-40/4).
Chip conveyor & cart (left exit).
Oil skimmer.
Handy air gun & coolant gun.
Remote handwheel.
Fully enclosed splash guarding.
Victor toolbox & standard accessories.
Machine dimension (with conveyor) (L x W x H) 3200 x 2848 x 3084mm.
Weight 6000kg
