Home > Miscellaneous > Other Machines Go Back
REQUEST PRICE VIEW MAP

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • OTEC
  • Model:
  • Amada PROTECTOR M42 bandsaw blade
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:

DESCRIPTION

Amada PROTECTOR bandsaw blade exclusively for structural steel, rolled sections metal cutting Exclusively for the structural steel, strong against tooth chipping and capable of providing unparalleled high efficiency. PROTECTOR added to the back face of the tooth tip prevents excessive cutting. Suitable for: Construction Steel, Aluminium Alloys, Copper Alloys M42 High-Speed Steel Edge Unique Design Tooth Form PROTECTOR added on the back face of the tooth tip suppresses excessive cutting and prevents continuous chipping from occurring. Wide Set Available Positive Rake Tooth Angle Strong Tooth Profile As the tooth tip is made stronger, it endures impacts caused during intermittent cutting. At the same time, high cutting efficiency is assured. Set Design The broaching style set pattern was designed to eliminate pinching, therefore preventing the blade from binding in the cut. Wide Set Available When a roll-formed large-size H-beam is cut, stress relieving may occur, pinching the blade. In order to prevent damage to the blade, a “WS” (Wide Set) type is available for PROTECTOR. ADVANTAGES Extra Tough Shock Resistance Extra Tough Tooth Strippage Resistance BENEFITS Extra Fast Cutting on Structural Steel Extra Long Life in Interrupted Structural Cutting Low Cost Per Cut The hardness of the Tooth Tip represent Amada’s average value. It is adjusted to some extent according to the types and size of the products. * The WS (Wide set) type blade is a special saw blade with a measure against pinching which occurs easily when cutting the roll formed large size H-beam (applicable to H-beam whose width is over 400mm and mainly intended for that of 600mm or more width). The “PROTECTOR” WS type blade is a special saw blade with an intensified measure against pinching than the conventional WS type blade. Using of the WS type blade for cutting the material where no pinching would occur may shorten the service life of the blade. Specifications may change without notice at the sole discretion of Amada’s Engineering Department.
+ request more information

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

SHARE PAGE

fdbdgbdgb fxnjmynhtbgvfcd

REQUEST MORE INFORMATION

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

You may also be interested in these Machines

    •
      Manufacturer:
      RECKERMANN
      Model:
      Reckermann - Kombi 1000 (F619)
      Description:
      {"Brand": "Reckermann", "Machine no": "F619", "Type": "Kombi 1000", "Table length": "1.000 mm", "Table width": "400 mm", "X": "800 mm", "Y": "300 mm", "Z": "400 mm", "Spindle taper": "ISO 40", "Speed minimum": "32 RPM", "Speed maximum": "2.800 RPM", ...

      More Info

    • Manufacturer:
      Model:
      NN (KOT175)
      Description:
      {"Brand": "NN", "Machine no": "KOT175", "Spindle taper": "ISO50"}

      More Info

    • Manufacturer:
      Hurco
      Model:
      HURCO TM8 CNC Lathe with WinMax Control. Year 2005
      Description:
      Maximum swing 525mm dia. Maximum Cutting Diameter 356mm. Maximum Cutting Length 483mm.Bar capacity 51mm.10 station turret. Spindle speed 4,800 rpm. Spindle nose A2-6. Spindle power  16 kW. X travel 203mm. Z travel 508mm. Tailstock. Toolsetter. Swarf...

      More Info

    • Manufacturer:
      Chester
      Model:
      CHESTER 254M Bandsaw
      Description:
      Quality bandsaw, with coolant system and brush style blade wipers ensuring efficient cutting and a longer blade life.

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User