Home > Miscellaneous > Other Machines Go Back
REQUEST PRICE VIEW MAP

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • OTEC
  • Model:
  • Amada PROTECTOR M42 bandsaw blade
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:

DESCRIPTION

Amada PROTECTOR bandsaw blade exclusively for structural steel, rolled sections metal cutting Exclusively for the structural steel, strong against tooth chipping and capable of providing unparalleled high efficiency. PROTECTOR added to the back face of the tooth tip prevents excessive cutting. Suitable for: Construction Steel, Aluminium Alloys, Copper Alloys M42 High-Speed Steel Edge Unique Design Tooth Form PROTECTOR added on the back face of the tooth tip suppresses excessive cutting and prevents continuous chipping from occurring. Wide Set Available Positive Rake Tooth Angle Strong Tooth Profile As the tooth tip is made stronger, it endures impacts caused during intermittent cutting. At the same time, high cutting efficiency is assured. Set Design The broaching style set pattern was designed to eliminate pinching, therefore preventing the blade from binding in the cut. Wide Set Available When a roll-formed large-size H-beam is cut, stress relieving may occur, pinching the blade. In order to prevent damage to the blade, a “WS” (Wide Set) type is available for PROTECTOR. ADVANTAGES Extra Tough Shock Resistance Extra Tough Tooth Strippage Resistance BENEFITS Extra Fast Cutting on Structural Steel Extra Long Life in Interrupted Structural Cutting Low Cost Per Cut The hardness of the Tooth Tip represent Amada’s average value. It is adjusted to some extent according to the types and size of the products. * The WS (Wide set) type blade is a special saw blade with a measure against pinching which occurs easily when cutting the roll formed large size H-beam (applicable to H-beam whose width is over 400mm and mainly intended for that of 600mm or more width). The “PROTECTOR” WS type blade is a special saw blade with an intensified measure against pinching than the conventional WS type blade. Using of the WS type blade for cutting the material where no pinching would occur may shorten the service life of the blade. Specifications may change without notice at the sole discretion of Amada’s Engineering Department.
+ request more information

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

SHARE PAGE

fdbdgbdgb fxnjmynhtbgvfcd

REQUEST MORE INFORMATION

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

You may also be interested in these Machines

    •
      Manufacturer:
      Okuma
      Model:
      Okuma LT2000EX OSP P200L
      Description:
      {"Stock number": "010788", "Serial number": "151873", "Swing over crosslide": "400mm", "Distance between spindlenoses": "960mm", "Spindlebore": "62mm", "Spindlespeed": "50-6000rpm", "Movement XA-XB": "205mm", "ZA-ZB": "700mm", "W": "730mm", "YA-YB": ...

      More Info

    • Manufacturer:
      Chester
      Model:
      CHESTER HALIFAX SERIES CNC LATHES
      Description:
      Quality CNC lathes with manual tailstock and heat exchanger. Ideal for a range of applications in your workshop.

      More Info

    • Manufacturer:
      Jaespa
      Model:
      Jaespa V302 DGH
      Description:
      {"Stock number": "110236", "Serial number": "22305 07", "Capacity \u00f8": "300mm", "Capacity square": "300x420mm", "Angluar 30\u00b0": "300x160mm", "Angular 45\u00b0": "300x260mm", "Sawblade": "3660x27x0,9mm", "Saw speed": "15-100m/min", "Sawmotor":...

      More Info

    • Manufacturer:
      GIDDINGS & LEWIS
      Model:
      SB SERIES
      Description:
      "50\/55\/60"

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User