Home > Metal Cutting > Milling Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Model:
  • MILLING LANDONIO T TYPE MOD. MEC-T 3000/5
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:
  • N/A

DESCRIPTION

LANDONIO NEW05471 5 AXIS COLUMN FOUR LINEAR AXIS ROTARY TABLE AND INDEXING HEAD CNC HEIDENHAIN iTNC 530 M STROKES: Axis X (longitudinal) mm. 3.000 Axis Y (head cross) mm. 1.000 Axis Z (vertical) mm. 2.000 Axis W (upright cross) mm. 1.000 Axis C (rotary table) 360 gradi ROTARY TABLE: Lenght mm. 1.500 Width mm. 1.800 T-slot N.8 T-slot widht mm.22 H 8 Distance between T-slots mm. 160 Load Kg. 10.000 MOTOR AND FEEDRATE: Axis X motor Nm 48 Axis Y motor Nm 28 Axis Z motor Nm 28 Axis W motor Nm 48 Axis C motor Nm 3600 Working speed mm/min. 10.000 Rapid speed m/min 15.000 SPINDLE: Spindle nose (DIN 69871) ISO 50 Power spindle motor (S1) with mechanical gear change Kw 25 (S1) / Kw 29 (S6) Automatic speed N.2 Max torque Nm 1500 Continuos variation of rotation speed at constant power rpm 300/3.000 (4.000 - 50% duty cycle) APPROX. WEIGHT: Kg. 35.000 EQUIPPED WITH: -Universal head birotative ISO 50 with automatic rotation of bpth the joints (indexed) with automatica positioning every 2.30° from CNC, automatic tool clamping. -Tool changer with rotary magazine with shuttle ring, ISO 50, 40 tools. -Tilt tool changer for changing the horizontal and vertical -Hydostatic support system for rotary table -Table rotation with torque motor -Chip conveyor, lenght 4000 mm, basement chain with inverter, micro overload, band width 200 mm, CNC management, unload right side -External coolant with low pressure nozzles -Adduction liquid lubricating and coolant through the spindle vertical -Tank for coolant 600 lt -Pump high pressure flow rate l/min 25 to 50 bars of pressure, electrical connection and operation CNC (replacing the pump 32 liters at 20 bar pressure) -Gear change mechanical FZ -Coolant unit for cabinet -Coolant unit for head and change -Coolant unit torque motor -Automatic axis clamping -Rigid tapping with encoder -Handwheel remote Heidenhain HR 410 -Heidhenain CC424 for dynamic TCPM -TCPM function CNC Heidenhain -Network connection to CNC Ethernet RJ-45 -The machine is covered with fixed panels and access sliding doors interlocked with safety microswitch CE standards (complete enclosure steel and polycarbonate) -User and manteinance manuals, lamp, pull studs anchored to the foundation, service keys. -Machine color RAL 7035 GREY / BLUE RAL 5024
+ request more information

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

You may also be interested in these Machines

    •
      Manufacturer:
      Sempuco
      Model:
      Sempuco - KF 90/40 NC (F189)
      Description:
      {"Brand": "Sempuco", "Machine no": "F189", "Type": "KF 90/40 NC", "Angle milling head": "", "Hydraulic tightening tool": "", "Spindle taper": "ISO 40", "Head adjustable in degrees": "1 kW", "With controlled engine": ""}

      More Info

    • Manufacturer:
      Maximart
      Model:
      Maximart - 4VS-S (F664)
      Description:
      {"Brand": "Maximart", "Machine no": "F664", "Type": "4VS-S", "Table length": "1.370 mm", "Table width": "250 mm", "X": "950 mm", "Y": "400 mm", "Z": "550 mm", "Engine power": "3.7 kW", "Spindle taper": "ISO40", "Speed minimum": "50 RPM", "Speed maxim...

      More Info

    • France
      Manufacturer:
      Huron
      Model:
      Milling Huron MU6
      Description:
      Milling Huron MU6  Model    MU6  Digital continuous variable feeds Table 2000X460MM

      More Info

    • Switzerland
      Manufacturer:
      MORI-SEIKI
      Model:
      MILLING & TURNING CENTER MORI-SEIKI TYPE NL1500-SMC
      Description:
      control M-720BM Mapps 2, C-axis, Hainbuch chuck Gr. 52 for collets BZI/G BMT60-bar-feeder LNS Hydrobar 6.52HS – 4.4  

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User