Abbott‘s master plate and segment system is a great choice for turning larger diameter work pieces. The system consists of an aluminum master plate, similar to a thin Pie Jaw®, which is pre-drilled and keyed to accommodate Abbott’s standard, off-the-shelf segment rings. Plates are available in various diameters from 15 to 60 inches and can be mounted on 8-60 inch diameter chucks, effectively increasing the holding capability of smaller chucks. The master plate can be custom machined to fit any model chuck, making it a permanent universal fixture on any machine.When using this system, the transition from one job to the next simply requires bolting on a new size or configuration of segments before continuing with the next production run. For repeat jobs, machine operators can designate job specific tooling, allowing them to setup in minutes by using pre-machined segments from a previous run. Segments are available in specific ID/OD ranges, allowing machining time to be spent on making production parts instead of boring out excess jaw material. The master plate and segment system maximizes flexibility between machines because segments can be used to run jobs on any machine that has been fitted with a master plate, regardless of machine or chuck type. In addition to reduced setup and tool preparation time the system enables material and shipping cost savings as well.
COMEV
07691
CNC D.ELECTRON
-HEIGHT OF CENTRE OVER BED MM 260
-DISTANCE BETWEEN CENTRE MM 2000
-SWING OVER BED MM 520
-SWING OVER SLIDE MM 265
-TURNING LENGHT MM 1750
-TURNING DIAMETRE MM 275
-SPINDLE TAPER CL 8''
-SPINDLE BORE MM 110
-CONE MORSE CM 5...
09227
Useful working dimensions:
-Width 950 mm
-Depth 710 mm
-Height mm 760
-Diameter 700 mm
-Admissible weight Kg 300
Machine eternal dimensions:
-Width 1200 mm
-Depth 1520 mm
-Height 1820 mm
-Weight Kg 350
Installed power kW 1
Compressed air 6-8 ba...
MORARA
New02489
- Max table stroke mm 470
- Max grinding lenght mm 120
- Min grinding diam. mm 3 / 10
- Max grinding diam. mm 150
- Max swing mm 250
- Engine grinding wheel HP 3,0
- Engine oil pump HP 2 - 3
- engine head piece holder HP 1 - 0,5
- eng...
Maximum swing 410mm . Maximum turning length 620mm. Maximum turning dia. 210mm. Maximum Spindle speed 6000 rpm on both main spindle and sub spindle. Spindle capacity 51mm. 15 station upper & lower turrets. Y axis on both turrets (+/- 30mm). Driven to...
