Table Size 500mm dia. x 400mm wide. X/Y/Z travels 350mm/ 550mm/510mm. A axis (table tilt) -120 – +30 ° (0.0001 ° increment). C axis (table rotation) +/-360 degrees (0.0001° increment). Maximum Workpiece Size 500mm x 350mm. Maximum table load 300kg. T slots 5 x 18mm x 80mm pitch. Maximum cutting feedrate 565m/minute. Rapid feedrates X/Y/Z axes 60/60/56m/min. Rapids A&C Axes 18,000°/min. Min/Max Height table to spindle nose 50mm/560mm. Automatic Tool Changer 40 station. Toolchange time chip to chip 4.5 seconds. Spindle Motor Power (40% ED/Cont rating) 22/15 kW. Electrical power requirement (40% ED/Cont rating) 51.07 kVA/41.17 kVA. Spindle speeds to 12,000 rpm. No. of controlled axes (5). Maximum Tool diameter /length/weight 90mm/300mm/8kg. Maximum tool dia. with empty adjacent pockets 130mm. Tool change time (chip to chip) 4.5 seconds. Coolant tank capacity 300 Litres. . G00 slope constant. Synchronised tapping. Auto pecking cycle with load detection. Tool radius compensation. Cylindrical interpolation. Mazatrol Smooth X Control Machine dimensions L x W x H 3235mm x 2400mm x 2975mm. Approximate weight 8000kg
Table Data:
Capacity | FS Series (DX) | PC Series | LG Series | FG Series (LS) | DH Series | SBM Series (V) | CM Series
X Axis | 4200mm | 6000mm | 6000mm | 10200mm | 2000mm | 10200mm | 36200mm
Y Axis | 2000mm | 2600mm | 2600mm | 2600mm | 1200mm | 530...
Low overall center of gravity to assist in the reduction of vibration.Three carriage support for the spindle headWide spaced guide ways for higher overall stiffness with minimal overhangs and better distribution of cutting forces.Siemens SINUMERIK ON...
Made in Taiwan. Fanuc/Seimens/Heidenhain control options, X axis 1800mm, Y axis 860mm, Z axis 700mm, Table size 1800 x 860mm, speed range 20~8000rpm, 24 station ATC.