CNC-TFM
06207
MACHINE DESCRIPTION
Vertical lathe double column CNC with accurate positioning system and table clamping which enable, besides traditional turning operation, also drilling operation and tapping as well as linear milling; ideal for machining of rings, flanges, valve bodies ecc., so all pieces that required turning, drilling and possible tapping operations, after positioning over table.
Machine is equipped with basement, where is seated table diameter 2.500 mm. and gear change box, and side column wich supports the crossrail. on crossrail operates a carriage RAM moved by ballscrew 50 P 10 with preloaded ballscrew with 5 ball revolutions, with a tool magazine 12 positions with automatic tool change.
Toolholder clamping is hydraulic; Toll magazine is able to allow toolholder for turning milling an tapping (taper ISO 50).
So it is possible to do every kind of turning operation, internal ed esternal, conic or cylindric; The powered RAM (motor power Kw 17) is able to make drilling machining and tapping with bore capacity 70 mm, by means of accuracy positioning system and table clamping.
Electric machine board is made with components mainly of Siemens brand, all electric motors and electronics that controls are new manufactured and guaranteed, as usual, by the manufacturer. Electric device and electronics are controlled by FAGOR 8055 or ECS 4802 (upon requirement is possible to put another CNC).
Lubrication and hydraulic movement of machine are possible by means of hydraulic device equiped with pump, electrovalves and other accessories of important italian brand (ILC, Camozzi, Duplomatic ecc.) which ensure efficiency and durability .
The machine is equiped with safety enclosure fitted with locks assisted by safety, as well as Integrated chip conveyor
TECHNICAL DETAILS:
Max turning diameter 2.630 mm.
Table diameter 2.500 mm.
Max load 15 ton.
Max working height 1.900 mm.
Table rotation 1,24-120 g/min.
No. of standard range 3 (hydraulic gear change)
Max RAM stroke:
- horizontal 1.750 mm.
- vertical 1.200 mm.
Max drilling diameter 70 mm.
Spindle motor power 57 Kw.
Drilling motor power 17 Kw.
Crossrail vertical stroke 1.600 mm
Machine weight 40 ton. ca.
Size (lenght x width x height) 4.800x5.100x5.200 mm. ca.
MACHINE RETROFITTED
QUASER
10011
MOD. MV-184 P-12
CNC Control Fanuc 0i-MD
X axis 1,020 mm
Y axis 610 mm
Z axis 610 mm
Table dimensions 1,200 x 600 mm
Maximum load capacity 500 kg
Five T-slots 18 mm H8
Spindle taper BBT40
Spindle diameter 70 mm
Max spindle speed 12,000 r...
TIGER
09724
TMT 5 RT 3000
ROTARY TABLE
CNC SELCA 4045PD
TABLE
Table 1500x2000 mm
N.7 T-slots 22 mm
Distance between T-slots 160 mm
Maximum weight allowed on the table 8000 kg
STROKES
Longitudinal X mm 3000
Transversal Y mm 1000
Transversal W mm 1000
...
DAEWOO
07233
CNC Fanuc 21i-MA
Axis X stroke 600 mm
Axis Y stroke 560 mm
Axis Z stroke 565 mm
Distance between spindle center - pallet surface mm 50-610
Distance between spindle nose - pallet center mm 150-715
Pallet dimensions 400x400 mm
Pallet numbe...
EUMACH
08164
CNC SELCA 4045
Table dimensions mm 1400x630
Max table load Kg 800
T-slots dimensions mm 18/5/125
Axis X stroke mm 1200
Axis Y stroke mm 660
Axis Z stroke mm 640
Distance between floor/table plan mm 835
Spidnle speed rpm 8000
Spindle con...
