Capacity between Centres 54”. Swing over Bed ways 24”. Swing over Cutter Carriage 12”. Min/Max Longitudinal Distance Nose of Work Spindle to Centre of Cutter Swivel Head 7”/55”. Min/Max Axial Distance Centre of Work Spindle to Centre of Cutter Spindle 0”/9.1/2”. Capacity through Work Spindle, Follow Rest, & Collet 6”. Max. O/S Diam., Single (Disc Type) 7’’. Max. O/S Diam., Ring (Hob) Type Thread Milling Cutter 3.7/8”. Min Effective Root Diameter of Cutter 2.7/8”. Distance centre of Cutter Spindle to Front Face of Cutter Head 1.3/8”. Max. Width, ring type cutter, using standard cutter spindle and cutter spindle outer support, no offset of hub 1.1/4’’ . Bore of Cutter, for standard cutter spindle 1.3/4”. Required Keyway of Cutter for Std. Cutter Spindle 1/4”x1/8” or 7/16”x3/16”. Pitch of Lead Screw 1/2”. Cutter spindle speeds by variable speed drive with a 20/1 Ratio 50 – 200 or 200 – 800 rpm. Machine complete with Cutter Arbor. Hobbing Head. Tailstock. Change Gears. Machine Serial No. 514. Machine Dimensions L x W 108” x 49”. Approximate weight 3628 kg.
Capacity: 5.000 ton
Table surface area : 2.000 x 1.000 mm
Slide area: 2.000 x 1.000 mm
Die height: 495 mm
Stroke length ram: 500 mm
Stroke length cushion (up): 10 mm
Stroke length cushion (down): 10 mm
Closing speed: 400 mm / sec
W...
The Vacmagic VM100 was primarily designed for grinding non-ferrous material on a magnetic chuck.
During the early stages of R & D it was discovered the VM100 could be much more.
Clamp the Vacmagic VM100 in a vise to reduce setup time, use as a ...
3-JAW CHUCKS "ROEHM" type ZG-300, 2 set of 3 stepped jaws,
New - Reference: 800037
dia. 110 mm, type W-20, for external and internal gripping
No technical data available for this product...
Press capacity: 30 ton
Throat depth: 160
Ram stroke adjustable: 20 - 45 mm
Slide adjustment: 10 / 60 mm
Shut height (stroke down, adjustment up): 220 mm
Table surface area : 470 x 300 mm
Slide area: 250 x 190 mm
Number of strokes: 80...
