Manual actuators for use with the Miteebite range of ID Xpansion clamps. These Actuators are specifically designed for gripping the ID of blind holes but may also be incorporated in many applications that require a straight draw actuated 90 degrees from the drive screw. They are capable of gripping on bores ranging from 4.1mm to 35.3mm using our standard ID clamps. Both styles of Actuators come completely assembled with the heat-treated cylinders tapped for the following clamp drive screws: M2, M4, M6, M8, M10 and M12.
GRAZIANO
08079
CNC ECS 2302
Max swing diameter mm 540
Max turning diameter mm 310
Max turning lenght mm 600
Bar passaging mm 65
Spindle mm 250
Turret 12 positions
Toolholder type VDI 40
Over size mm 3195x1680x2280
USED MACHINE
