Swing Over Bed:
480mm Distance Between Centres:
1,250 / 2,000mm Spindle Bore:
80mm Spindle:
7.5kW (10hp), 2,500 rpm Standard Equipment:
["250mm 3 Jaw Chuck","Constant Surface Speed","TRAKing\u00ae","3 Range Headstock","Quick Change Toolpost and 6 Holders","Rapid Traverse with Joy Stick","Air Assist Tailstock","Interlocked Chuck Guard and Main Guard","Auto Lubrication","Flood Coolant","Worklight","Centres and Bushes"] Optional Equipment:
["Verify Solid Model Graphics","DXF File Converter","Offline Programming","Drilling Attachment","Adjustable Backstop","Faceplates, Steadies, Chucks and Collet Chucks","4 or 8 Station Auto Indexing Toolpost","Swarf Conveyor"] Machine Features:
{"Control":"The latest generation of ProtoTRAK RLX control provides maximum operator productivity particularly on one-off components or small batches. Even an operator with no previous CNC experience will be producing simple or complex parts within hours.","Tailstock":"Heavy tailstock with two clamp points prevents movement when machining components between centres. Repositioning is effortless and is achieved by providing an air cushion that lifts the tailstock from the bed.","Guarding":"Built and guarded to comply with the latest CE regulations to ensure complete operator safety. When closed and in full CNC operation the easy lift, totally enclosed guard ensures watertight containment of swarf and coolant.","Saddle & Apron":"The apron moves with the saddle and emulates the actions of a manual lathe. This brings reassuring familiarity to the first-time user of a CNC Lathe, and a joystick provides for rapid positioning.","Headstock":"The headstock is built using Japanese induction hardened and precision ground gears. Two precision taper roller bearings and a support journal bearing ensure spindle rigidity and concentricity. High pressure oil lubrication is provided to all gears and bearings via a pump and oil cooler ensuring thermal stability, quiet running and long life.","Swarf Tray":"Front opening easy access Swarf Tray makes light work of swarf removal and reduces the amount of space required at the rear of the machine.","TRAKing\u00ae":"Proturn Lathes are standard with TRAKing which allows the operator to wind the handwheel and the machine moves through the program. The faster you wind the faster it machines. Stop or reverse the handwheel and the machine does the same.","Cast Bed Base":"Unlike most other Lathes that are cast or fabricated in two or three pieces and then bolted together, the Proturn RLX is a one-piece solid ribbed casting that provides weight and rigidity ensuring unrivalled precision. The extra-wide \u2018Vee and flat\u2019 bed way provides a large bearing surface that makes other Lathes seem flimsy by comparison."} Specifications:
{"Swing Over Bed":"480mm","Swing in Gap":"700mm","Gap in front of Faceplate":"170mm","Swing over Cross Slide":"257mm","Cross Slide Travel":"230mm","Distance between Centres":"1,250 \/ 2,000mm","Maximum Cutting Length":"1,080 \/ 1,900mm","Spindle Bore":"80mm","Spindle Nose":"D1-8 Camlock","Spindle Taper":"MT7 in bush","Spindle":"7.5kW (10hp)","Spindle Speeds":"25 - 2,500 rpm","Speed Ranges":"3 Ranges (25 - 300, 50 - 850 & 140 - 2,500 rpm)","Tailstock Travel":"160mm","Tailstock Taper":"MT5","Tailstock Diameter":"75mm","Bed Width":"370mm","Machine Weight":"2,700 \/ 3,700kg","Floorplan (L x D x H)":"2,600 x 1,480 x 1,830mm \/ 3,450 x 1,600 x 1,910mm","Ballscrews":"X & Z","Servo Motors":"X & Z","Power Requirements":"33A","Air Requirements":"6 bar (220 L\/min)"} General:
{"Easier":"Now with 15.6\u201d touchscreen","Faster":"Drawing to finished component much faster than before","Better":"New Hardware, Faster Feeds, 24 NEW features"}
