Home > Sawing > Horizontal Bandsaws Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Horizon
  • Model:
  • Amada HA400W horizontal automatic bandsaw
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:
  • N/A

DESCRIPTION

Bandsaw Machine HA400W Amada designed the HA400W horizontal automatic bandsaw starting from the material to be sawn, engineering the machine around the capability of the saw blade, therefore guaranteeing optimum cutting performance. Utilising a 41mm wide blade the Amada HA400W horizontal automatic bandsaw has sufficient beam strength to enable it to cut any metal quickly and efficiently, up to its maximum capacity of 400mm, thus delivering an excellent cost-per-cut ratio. The optimum solution for economic cutting of solid, shaped and hollow materials in all material qualities – individually or in a bundle. Compact and robust completely automatic band saw machines in stable swivel joint design for economic cutting of solid, shaped and hollow materials in all material qualities including Inconel, Hastelloy and titanium – individually or in a bundle. In automatic operation, the cut-off length and piece count can be preselected. The combined feed pressure system has the ability to select the feed pressure to suit the material type and section being cut. For example, constant pressure for difficult to machine solid material, load-dependent feed for tubes and profiles to suit the changing cut section. Short cycle times due to patented material scanner with automatic changeover from rapid feed to feed. An integrated chip conveyor is included in the basic equipment. Pressure/flow feed control The independent pressure and flow controls in series ensure that optimum cutting can be achieved regardless of the section or alloy being cut. Drive wheel transmission This is designed and built by Amada to provide high efficiency reduction, therefore delivering more power to the large diameter shaft. This ensures that developed torque is transferred to the blade. Maximum cutting capacity Round bar: 400 mm round bar Rectangular bar: 400mm wide x 400mm high Automatic, powered chip conveyor Multiple index up to 9 times The NC controller provides the requirement for automatic sawing using selectable cut-off lengths from 0 to 470 mm, with multiple infeed up to 9999 mm. For a full specification, demonstration or quotation call now on 01274 870311
+ request more information

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

You may also be interested in these Machines

    •
      Manufacturer:
      Imet
      Model:
      Imet BS 300-Plus GH
      Description:
      Swing head two way easy mitre | Rotating cutting table | Positive mitre locations | Quick action manual vice | Sliding vice for left right mitre cuts | Gravity feed automatic cutting with 3 way control | Electric flood coolant system | Carbide blade ...

      More Info

    • Manufacturer:
      Pedrazzoli
      Model:
      Pedrazzoli SN 420 MRM manual mitre bandsaw
      Description:
      MAIN FEATURES All main machine components are in cast iron. Very robust structure reduces noise level and vibrations during cutting cycle. ACCESSORIES UPON REQUEST: DIMENSIONS > 870 x 1860 x 2100 mm WORKTOP HEIGHT > 955 mm WEIGHT > 550 kg > Round ...

      More Info

    • Manufacturer:
      Amada
      Model:
      Amada H1000 large capacity bandsaw
      Description:
      Amada Bandsaw H 1000 II Amada H1000 large capacity bandsaw has 1000mm capacity, single column and guide with a heavy duty construction. Amada have designed a series of heavy duty large capacity bandsaws to cope with adverse environments and condition...

      More Info

    • Manufacturer:
      Everising
      Model:
      Everising H-560-HA
      Description:
      Max. cutting cap. 90 deg, round: 22”Max. cutting cap. 90 deg, rectangular: 24”W x 22” HBlade dimensions: 260” x 2” x .063”Blade guides: Roller bearing & carbideGuide arm (manual / powered): ManualBlade speeds: 60-300 FPMNumber of speeds: ...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User