Bandsaw Machine Amada HFA530CNC
Amada have designed this automatic bandsaw machine in such a way that the cutting of material is done by the upper edge of the bandsaw blade thus reducing the height of the support columns by 50%.This creates a far more rigid structure enabling faster cutting and longer blade life.
Windows based CNC Control
The Functions and set up of the bandsaw are controlled by a Windows based touch screen. Simple to use it enables the operator to choose the size, type, tolerance and number of cuts required of most materials, then JUST PRESS GO. The machine will cut the Material and give optimum performance.The screen gives an estimated finish time for each job.A history of cutting and fault finding information is also accessible.
Motor and Transmission
A high powered 7.5 kw motor coupled with a special high efficiency transmission maintains high cutting rates even when cutting the toughest of materials.
Maximum Blade Width
A 67mm wide blade 6670 mm long 1.6mm thick gives a very high beam strength enabling faster down feeds achieving phenominal cutting rates even on tough materials such as Inconel, Hastelloy and Monel.
Automatic Adjust Double Wire Brushes
Automatically adjusted double wire brush design assures keeping the chip area of the blade clean for maximum life of blade and brushes in all types of cutting.
Automatic powered chip conveyor
Maximum Cutting Capacity
Round bar: 530mm
Rectangular bar: 530mm x 530mm.
Total power requirement12 kWweight of the machine ca.4,1 tdimensions of the machine ca.3,1 x 5,9 msaw band length6300 mmcapacity 90 degrees: round410 mmcapacity 90 degrees: flat620 x 400 mmcapacity 45 degrees: flat450 x 400 mmcutting range 30° flat3...
Precision two-way miter cut to 45 and 60 degrees, right and left | Large mitre scale for precision angle cuts | Swivel head for easy angle cutting without moving material | Electric coolant system with built-in tank and pump | Highly efficient, low e...
