Quill range 80 mm or (3.1875″) of travel Quill feed has a rapid-action lever and fine-feed to the quill, the latter working through worm-and-wheel gearing with a micrometer-dial equipped handwheel graduated with 100 divisions of 0.02 mm or 80 of 0.001 Fitted with the popular R8 taper nose, Ten speeds from 160 to 2,640 r.p.m The ram is able to be shifted forwards and backwards through 174 mm (6.875″) Motor-driven 6-speed gearbox unit that provided both table power feeds and “rapids Feed rates were split into high and low ranges: the former at 14, 32 and 50 mm/min and the latter at 75, 158 and 256 mm/min. with the rapid rate at 1250 mm/min.. Range of tooling & manual.
Upgrade your metalworking capabilities with the Trumpf TruPunch Model 2020 Punching Machine. This versatile machine offers precision punching for a wide range of applications, ensuring efficient and accurate results. Don’t miss out on the opportuni...
DISPONIBILE DA LUGLIO 2025
ANNO: 2007
N/S: 197060
Informazioni generali
Sistema di controllo
Trasmissione principale
Movimento
Media
DATI NON IMPEGNATIVI DA VERIFICARSI
Lunghezza macchina: 4080 mm
Larghezza macchina: 3200 mm
Altezza macchina: 2800 mm...
Klamp QCRL42 collet chucks are suitable for spring, varibore and rubberflex collets increasing its flexibility. Varibore and rubberflex collets allow rough, unfinished bar to be machined in the first operation and spring collets can be used for high ...
SASS
07392
CAPACITY:
Steel drilling capacity R = 60 mm 70
Cast iron 20/22 drilling capacity mm 70
SPINDLE:
Sliding quill diam. mm 85
Cone Morse 5
Vertical stroke mm 400
Speed n.16 - rpm 32: 1945
AC motor HP 5.5-7.5
HEAD-ARM:
Max lenght arm 1600 mm
Mi...
