PRELIMINARY SPECIFICATIONS6" NOMINAL WORK SWING18" NOMINAL DISTANCE BETWEEN CENTERS6-7/8" MAX DIA MACHINE WILL GRIND WITH FULL SIZE WHEEL10-1/2" MIN DIA WHEEL TO GRIND ZERO DIA WOR ON CENTERS38-3/4" HEIGHT FROM FLOOR TO WORK CENTERLINEWORK CARRIAGE:2-240 IPM TRAVERSE SPEED.200" TRAVERSE PER TURN OF HAND WHEEL20 DEGREES INCLUDED ANGLE1/4-2" WORK REST CAPACITY (NOT INCLUDED)HEAD & FOOT STOCK:#10 JARNO HEAD STOCK WORK CENTER#6 JARNO FOOT STOCK WORK CENTER60/90/150 HEAD STOCK SWIVEL RANGE225/400/600 RPM WORK SPEEDS1" DIA HOLE THROUGH SPINDLE5A2 HEAD STOCK SPINDLE NOSEWHEEL HEAD & FEED16" X 1" X 15" GRINDING WHEEL (STANDARD)3" MAXIMUM GRINDING WHEEL WIDTH1500/1900 RPM GRINDING WHEEL SPEEDS9-1/2" MIN DIAMETER OF WORN WHEELMAX DISTANCE FROM WHEEL CENTER TO WORK CENTER 12-1/2" FOR HYDRAULIC INFEED MACHINES11-1/2" FOR HAND WHEEL FEED MACHINES2-1/2" MIN DISTANCE CENTER TO CENTER W/ FOOT STOCK REMOVED.100" DIA REDUCTION PER REVOLUTION OF WHEEL FEED HAND WHEEL.001" DIA REDUCTION PER REVOLUTION OF FINE KNOB.000050" MIN FEED GRADUATIONS ON DIAMETER.090" MAX HYDRAULIC INFEED ON DIA FOR HYDRAULIC INFEED MACHINES1" RAPID INFEED STROKE FOR HYDRAULIC INFEED MACHINESEQUIPPED WITH:AUTO PLUNGE CYCLEHYDRAULIC TABLE TRAVELBEHIND WHEEL TRU-FORM DRESSERBIJUR LUBELH & RH TARRYHAND TRAVERSETABLE DOGS9-1/4 GALLON HYDRAULIC TANK19 GALLON COOLANT TANK3 HP WHEEL DRIVE MOTOR- 1750 RPM1/4 HP DRIVE MOTOR1/4 HP WHEEL SPINDLE LUBRICATION MOTOR1/10 HP COOLANT PUMP MOTOR1 HP HYDRAULIC PUMP MOTOR FOR MACHINES WITH HYD TRAVERSEAPPROX O.A. WEIGHT: 3750LBS (W/ HAND TRAVERSE & HAND WHEEL)- 4,050 LBS (W/HYD TRAVERSE & HAND WHEEL)- 4,000 LBS (W/ HAND TRAVERSE & HYD INFEED)- 4,150 LBS (W/ HYD TRAVERESE & HYD INFEED)APPROX O.A. DIMENSIONS:APPROX FLOOR SPACE: 106" X 50"
{"Centre height":"100 mm","Distance between centres":"400 mm","Grinding wheel right and left hand":"","Grinding wheel:":"","Diameter":"300 mm","Width":"1200 mm","Bore":"127 mm","Grinding wheel speeds:":"","number (steps)":"3","from":"65 rpm","up to":...
