Next 25 is an innovative and unique automation solution designed for multi-spindle lathes combining extremely easy handling with high performance.
This compact loader handles 3mm to 25mm bars and by using dedicated guide channel sizes on bar stock diameters is rated for up to 10,000 RPM spindles speeds.
The Next 25 automatically loads the bar into the lathe. Bar stock feeding is then controlled by the lathe using either the feeding fingers or the bar pulling option when available.
Next 25 has a 220mm linear magazine capacity. Bar selection is completely automatic and diameter set up is quick and simple.
Bar loading is controlled by Next using a brushless motor driving a worm screw providing both precise feeding and high torque. Bar changeover time could require as little as 6 seconds depending on the lathe cycle.
Changeover time for each guide channel set is less than 2 minutes thanks to the IEMCA Snap-in system.
Simple to Use
The Iemca barfeed devices design allows for simple set-up for both mechanical and component programming. Iemca devices allow for setting-up a new material size on full length barfeed models to be both quick and easy and can be less than 2 minutes.
Floor Space
The innovative double pusher and guide channel design reduces the overall length of the barfeed and make the Iemca barfeed range the most compact on the market.
High Rotational Speeds
This compact loader handles 3mm to 25mm bars and by using dedicated guide channel sizes on bar stock diameters is rated for up to 10,000 RPM spindles speeds.
Snap-in Guides
The round section guide channels are fully closed and lubricated and can be completed replaced without tools in less than a few minutes.
Greater Flexibility
Changeover time for each guide channel set is less than 2 minutes thanks to the IEMCA Snap-in system.
Changeover
Changeover from one material size to another is made simple by the Iemca design features. Changeover times can be as low as a few minutes.
To purchase this item now
