The Kitagawa BR series is a large bore three jaw chuck available as a BR Series with Adaptor Plate . When coupled with T-nuts Plus a T.I.R of 0.01mm or less can be maintained to reduce setup times. The BR series are supplied with a blank drawnut. Set of Soft Jaws and a set of standard T-nuts as standard.
High Precision, Ultra-large Through-hole High-speed Power Chuck Chucks are manufactured from high grade alloy steel. Three jaw wedge style power chucks deliver up to 20% more speed, Gripping force and bore size when compared to conventional chucks. Easy to upgrade from existing chucks, Fully interchangeable with the Kitagawa B-200 and BB-200 series chucks. The only requirement is a new threaded drawtnut. The BR Series uses the same hydraulic cylinder. if changing size for size, allowing you to implement the best performance at the lowest cost
also available without the adaptor platehttps://www.1mta.com/product/br-series/BR Series Chuckhttps://kitagawa.global/en/products/power-chucks/open-centre/br-high-accuracy-standard.html
Capacity 550 Litres gross, 350 Litres net. Bowl with separator. Power 4kW. 16 Amps. User Manual, The RVS-5 vibratory bowl with separation and unload is designed for processing medium size components and higher volume batches, as well as prototypes....
These reduction bushes allow for the fitting of boring bars and drills with a tapered shaft. All sizes are manufactured in a range of capacities. The sleeves are hardened and ground for a good fit for both the holder and the shaft.
