Diameter of work admitted: 4 mm. with flat cames: 24 mm. with feed device 1:1.2: 58 mm. Spindle hole: 4 mm. Number of tool cutters: 2. Number of spindle speeds: 2. from: 4000 t/min. up to: 6000 t/min. Voltage 50 Hz 3x: 380 Volt. Total power required: 0.8 CV. Machine's weight about: 870 kg. Length: 1400 mm. Width: 1000 mm. Height: 1500 mm.
The Kitagawa BR series is a large bore three jaw chuck available as a BR Series with Adaptor Plate . When coupled with T-nuts Plus a T.I.R of 0.01mm or less can be maintained to reduce setup times. The BR series are supplied with a blank drawnut. Set...