Home > Metal Cutting > Lathes (CNC and Manual) Go Back
REQUEST PRICE

023083 - KELLENBERGER KEL-VARIA 2RU 225/1500

MACHINE INFORMATION AND SPECIFICATION

    Manufacturer:

  • VARI

    Model:

  • 023083 - KELLENBERGER KEL-VARIA 2RU 225/1500

    Condition:

  • 1

    YOM:

  • NA

    Control:

  • NA

    Price:

  • POA

    Country:

DESCRIPTION
Centre height: 225 mm.
Distance between centres: 1500 mm.
Max. grinding diameter: 432 mm.
Workpiece weight on centres max.: 150 kg.
Diameter: 500 mm.
Width: 80 mm.
Bore: 127 mm.
B axis resolution max.: 0.1 °.
from: 8 t/min.
up to: 800 t/min.
Swivelling range: +10 / -230 °.
Peripheral speed: 45 m/s.
Holding taper:: 5 CM.
Permitted load capacity: 160 Nm.
Taper in tailstock:: 4 CM.
Spindle stroke: 50 mm.
Pressure: 200 - 700 N.
Voltage 50 Hz 3x: 400 Volt.
Thread grinding cycles: KEL-ASSIST 100.
Electrical measuring instrum.: MOVOMATIC.
Tool measuring device: KEL-SET.
Measuring feeler gauge: MOVOMATIC C25.
Automatic balancing device: KEL-BALANCE.
Macnetic chuck diameter: 400 mm.
+ request more information

SEND ENQUIRY

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

You may also be interested in these Machines

    •
      Manufacturer:
      Shop press
      Model:
      workshop press 30 ton
      Description:
      Our 30 ton workshop press has a fixed cylinder and an in-height adjustable working table. Equipped with pressure regulation, manometer, 2 speeds and a joystick to move the piston up and down electrically. The hydraulic unit is also provided with a ma...

      More Info

    • Model:
      PRESS NAVA MOD. 2MI/250/125/B
      Description:
      NAVA 09443 Max ram force 250 tons Max blank holder force 125 tons Max ram stroke 800 mm Max blank holder stroke 350 mm Max ram pressure Kg/cm2 220 Max blank holder pressure Kg/cm2 255 Ram planes dimensions 1600x1200 mm Blank holder planes dimensions ...

      More Info

    • Manufacturer:
      Herber
      Model:
      Herber ABM 40 ASV
      Description:
      {"Stock number": "290692", "Serial number": "84021", "Capacity": "40x1/32x2 mm", "Mandrel": "3500 mm", "Length": "4900 mm", "Width": "1000 mm", "Weight": "2500 kg"}

      More Info

    • Belgium
      Manufacturer:
      Mondiale
      Model:
      MONDIALE NORDIC 960 (8300 – 2300mm)
      Description:
      Lubrication system main spindle Automatic lubrication system Coolant equipment Rear guard over the entire length of the machine Square tool post Fixed centre and reduction sleeve Leveling feeds Protection of the shaft Protection of the chuck with mic...

      More Info

    • Manufacturer:
      Padovani
      Model:
      Padovani Labor E300 (12.109C)
      Description:
      Centre distance (mm): 4000Max swing over bed (mm): 720Max swing over cross slide (mm): 360Spindle bore (mm): 100R.P.M.: 15 - 1200kW: 22Volts: 380VCycles: 503-Jaw chuck ø (mm): 4004-Jaw chuck ø (mm): 250Steady rest ø (mm): 360...

      More Info

    • Manufacturer:
      Hyundai
      Model:
      KIA Hyundai - VX 500
      Description:
      X - Travel: 1060mm | Y - Travel: 510mm | Z - Travel: 635mm | Table Length: 1200mm | Table Width: 500mm | Feed rate X-Axis: 20000mm/min. | Feed rate Y-Axis: 20000mm/min. | Feed rate Z-Axis: 20000mm/min. | Spindle Taper: 40ISO/Bt/Mk | Power on spindle:...

      More Info

    • Manufacturer:
      BOEHRINGER
      Model:
      VDF BOEHRINGER - DUE 800
      Description:
      DBC Turning Length: 2000mm | Swing over bed Ø: 820mm | Swing over cross slide Ø: 515mm | Spindle bore: 128mm | Spindle power: 30kW | Bed width: 560mm | Stroke pinole: 125mm | Spindle taper: 6Mk | Speeds / ranges: 1400Rpm | Workpiece load: 3150 | Le...

      More Info

    • Manufacturer:
      Horizon
      Model:
      VTURN S26/60LSB Horizontal Turning Lathe
      Description:
      Fanuc 0i-TF Plus Control Large Spindle Bore – Bar Capacity 91mm Air Conditioner for Electrical Cabinet Tailstock MT#4 (live) Kitagawa 12″ Chuck & Cylinder High Pressure Coolant Grundfos SPK4-8 Parts Catcher (head mounted, above chuck, hydraulic) ...

      More Info

    • Manufacturer:
      HINES
      Model:
      Spare parts for milling machines PF 4th axe / dividing plate Dia 350 mm
      Description:

      More Info

    • Belgium
      Manufacturer:
      TOS
      Model:
      TOS BUC63A (11.276F)
      Description:
      Marposs measuring control Internal grinding attachment 4 x steady rests Extra wheel flange Coolant system

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User