• Machining Centres (General)
    Poland
    Control:
    Bosch
    Description:
    - year manufactured 12/2008 - control – bosch rexroth 7axes - travels: x – 3000 mm y – 600 mm, z – 800 mm(horizontal), z – 700 mm (vertical) - rapids in x/y/z – 48 m/min - 1-axis nc swivel head, swivelling - +/- 105 degrees - direct measuring system - +/- 3 arcs...
  • Machining Centres (General)
    Ireland
    Description:
    Turn your 3-axis haas machine into a 5-axis

    2011

    Private

    Used

  • Machining Centres (General)
    Ireland
    Control:
    Haas
    Description:
    yom: 01/13 spindle taper: bt50 control: haas traverses xyz: 3,048 x 1,016 x 762mm table size: 3,048 x 711mm spindle speed: 7,500rpm spindle motor power: 22.4kw (30hp) drive system: 2-speed gearbox tool change capacity: 30-station side-moun...

    2013

    Private

    Used

  • Machining Centres (General)
    Belgium
    Make/Model:
    Control:
    NUM 720-F
    Description:
    machine number 9606020 control num 720-f taper 50 table size (mm x mm) 2000 x 460 r.p.m. spindle 30 - 2066 (22 steps) kw 11 volts (v) 400 cycles (hz) 50
  • Machining Centres (General)
    Belgium
    Make/Model:
    Control:
    NUM 720-F
    Description:
    machine number 9606020 control num 720-f taper 50 table size (mm x mm) 2000 x 460 r.p.m. spindle 30 - 2066 (22 steps) kw 11 volts (v) 400 cycles (hz) 50
  • Machining Centres (General)
    Switzerland
    Make/Model:
    Description:
    number of axis total 5number of axis total5longitudinal travel (x-axis) 600 mmlongitudinal travel (x-axis)600 mmtransversal travel (y axis) ...
  • Machining Centres (General)
    United Kingdom
    Description:
    Dom: 2001
    x 548.6 mm, y 408.9 mm, z 459.7 mm
    power 5.6 kw
    rpm 15000 rpm
    atc 30
    table 599.4 mm x 378.5 mm
    taper bt40
    control cnc (yasnac j300)
    machine weight: 4 tonsmachine dimensions: 7? x 8? x 9?
  • Machining Centres (General)
    Switzerland
    Make/Model:
    Description:
    Table length 750 mmtable length750 mmtable width 450 mmtable width450 mmtable load max. 300...
  • Machining Centres (General)
    Poland
    Description:
    Year 12/2008 • control – bosch rexroth 7axes • travels: x/y/z: 3000 / 600 / 800 mm (horizontal), z:700 mm (vertical) • rapids in x/y/z – 48 m/min • 1-axis nc swivel head, swivelling - +/- 105 degrees • direct measuring system - +/- 3 arcseconds • either continuous...
  • Machining Centres (General)
    United Kingdom
    Description:
    Model 70c, serial no 130844, mfd july 1997, cnc control mazatrol t plus, swing over bed 915mm, swing over saddle 685mm, maximum turning length 1015mm, spindle speeds 0 – 1300rpm, spindle bore 118mm, x axis traverse 700mm, x axis feeds 0 – 5000mm/min, x axis rapids 12m/mi...

    1997

    Private

    Used

  • Machining Centres (General)
    Belgium
    Description:
    920 x 705 mm cnc
    swing over bed: 920 mm
    swing over cross-slide: 742 mm

    Private

    Used

  • Machining Centres (General)
    Netherlands
    Description:
  • Machining Centres (General)
    Germany
    Description:
    X-way 500 mm
    y way 450 mm
    z-way 400 mm

    2007

    Private

    Used

  • Machining Centres (General)
    Germany
    Make/Model:
    Description:
    X-way 500 mm
    y way 450 mm
    z-way 400 mm

    2007

    Private

    Used

  • Machining Centres (General)
    Germany
    Make/Model:
    Description:
    X-way 1800 mm
    y way 2000 mm
    z-way 1100 mm

    2002

    Private

    Used

  • Machining Centres (General)
    Germany
    Make/Model:
    Description:
    X-way 2500 mm
    y way 1000 mm
    z-way 1100 mm

    2005

    Private

    Used

  • Machining Centres (General)
    Germany
    Make/Model:
    Description:
    X-way 740 mm
    y way 500 mm
    z-way 500 mm

    2005

    Private

    Used

  • Machining Centres (General)
    Germany
    Description:
    X-way 800 mm
    y way 800 mm
    z-way 800 mm

    2006

    Private

    Used

  • Machining Centres (General)
    Belgium
    Description:
    Heidenhain control, chipconveyor
    protective covers, extra steady

    Private

    Used

  • Machining Centres (General)
    Belgium
    Description:
    4 axis simultaneous x / y / z + turntable. high pressure cooling through spindle (20 bar), 4th axis on table

    Private

    Used

MachineSpotter.com lists a wide variety of metal-cutting machines tools for sale. You can explore our inventory to select used and new metal-cutting machines in accordance with your specific business requirements, regardless of whether you’re a multi-national blue-chip OEM or a family-run subcontractor.

Read More