Make/Model:
Description:
-
LathesIrelandMake/Model:Control:CNCDescription:This machine is in original excellent condition. swing over bed 620mm, swing over cross slide 380mm, distance between centres 2,100mm, 25-2,500rpm, tailstock dia 150mm, 8-station turret, smw hydraulic steady, fanuc fapt turn control, chip conveyor
Used
-
LathesUnited KingdomMake/Model:Description:
NEW
Private
Used
-
LathesUnited KingdomMake/Model:Description:
NEW
Private
Used
-
LathesUnited KingdomMake/Model:Description:
NEW
Private
Used
-
LathesUnited KingdomMake/Model:Description:
NEW
Private
Used
-
LathesBelgiumMake/Model:Description:sliding bed lathe
center distance, min-max 3.000 -4.500 mm
max. swing over bed Ø 1.000 mm
max. swing over cross slide Ø 700 mm
Used
-
LathesBelgiumMake/Model:Description:centre distance 6.000 mm
max. swing over bed Ø 820 mm
max. swing over cross slide Ø 570 mm
Used
-
LathesUnited KingdomMake/Model:Description:3000mm between centres 600mm 4 jaw chuck 100mm spindle bore 850mm swing dual dials rapid traverse 11/200rpm spindle speed 3 point steady
Used
-
LathesUnited KingdomMake/Model:Description:
polstar poreba tr 80 centre lathe 800mm x 3500mm
800mm swing over bed
3500mm between centres
4 jaw chuck
3 point steadyUsed
-
LathesUnited KingdomMake/Model:Description:Mostana im63 x 3000mm centre latheswing over bed 660mm,swing over cross slide 355mm,distance between centres 3000mmspeeds 10 1250 rpmcomplete with:3 jaw 16″4 jaw 26″fixed steady 15″ and trav. steadychuck guarddigita...
Used
-
LathesUnited KingdomDescription:Mostana 16k40 x 3000mm gap bed centre latheswing over bed 800 mmdistance between centres 3,000 mmhollow spindle 110 mmspeeds 6.3 – 1,000 rpmrapid traverse to saddle long & crosspower feed to compound slidegap bedequipped with:...
Used
-
LathesUnited KingdomMake/Model:Description:Herbert model 9c-30 combination turret latheswing over bed 30”swing over saddle 21”max distance chuck to turret face 54”hollow spindle 6”spindle speeds 7 – 600 rpmmain motor 25/7hp25” 4 jaw chuck4 way tool ...
Used
-
LathesUnited KingdomMake/Model:Description:Herbert 9c-30 long bed turret latheswing over bed 30″” (762mm)swing over cross slide 21″” (533mm)spindle bore 4 ¼”” (108mm)spindle speeds 22 – 600rpmmax. distance spindle flange to turret face 100″” (2540mm)complete with:...
Used
-
LathesUnited KingdomMake/Model:Description:Herbert model 14/45 combination turret latheswing over bed 1230mmmaximum distance between chuck and turret face2300mm (90.5″)spindle bore 210mm4 jaw chuckmain motor 50hptaper turning att.4 way indexing tool postwe have for sale the foll...
Used
-
LathesUnited KingdomMake/Model:Description:Herbert model 14/45 combination turret latheswing over bed 1230mmmaximum distance between chuck and turret face 2300mmspindle bore 210mm4 jaw chucktaper turning att.herbert 14/45 turret lathe 1230mm x 2300mmswing over bed 1230mm (48.5...
Used
-
LathesUnited KingdomMake/Model:Description:Harrison type vs-330 tool room centre lathe,centre height 6 9/16″,swing over bed 13″,distance between centres 25″,swing over cross slide 8 1/4″,spindle bore 1 1/2″,spindle speeds 35-3000 rpm,metric l/s & metric dials,co...
Used
-
LathesUnited KingdomDescription:Harrison m390 x 1250mm gap bed centre lathe (2004)height of centres 195mmdistance between centres 1250mmswing over bed 400mmswing in gap 585mmgap width from faceplate 165mmswing over cross slide 246mmspindle bored to pass 54mmspindle n...
Used
-
LathesUnited KingdomMake/Model:Description:Harrison alpha 330+ cnc lathefanuc controlswing 330mmswing over the cross-slide 210mmdistance between centers 1000mmspindle motor power 7.5kwspindle nose d1-4spindle speed 3500rpmsub spindle bore 40mmtailstock qui...
Used
-
LathesUnited KingdomMake/Model:Description:120mm spindle bore,fitted with 26” 4 jaw chuck,120” between centres,20” swing over saddle,50” swing,dsg type 30 gap bed centre lathe x 120″serial no. 41292,120mm spindle bore,fitted with 26” 4 jaw chuck,120” betwee...
Used
SEND ENQUIRY
MachineSpotter.com lists a wide variety of metal-cutting machines tools for sale. You can explore our inventory to select used and new metal-cutting machines in accordance with your specific business requirements, regardless of whether you’re a multi-national blue-chip OEM or a family-run subcontractor.
Loading...
