Specifications
Model: TruPunch 2020
Work area (X x Y): 100" x 50"
Maximum sheet thickness: 0.25"
Maximum punching force: 20 tons
Active presser foot: Up to 2.5 tons
Maximum workpiece weight: 330 lbs.
Speeds
X axis: 3543 ipm
Y axis: 2362 ipm
Simultaneous (X and Y): 4252 ipm
C axis: 180 rpm
Maximum stroke rate when punching (E=1 mm): 900 1/min
Maximum stroke rate when marking (approximate): 2,200 1/min
Maximum acceleration
X axis: 472 in/s2
Y axis: 315 in/s2
C axis: 200 1/s2
Tools
Linear magazine: 19 tools with 2 clamps
No. when using Multitool: 19-190 tools
Multitool: 5/10 station
Tool change time
Single tool: < 3.5s
MultiTool: < 0.9s
Accuracy
Positioning accuracy Pa: +/- 0.004 in.
Repeatability Ps: +/- 0.001 in.
Programmable parts chute
Maximum part size when using fixed chute: 8 x 8 in.
Space Requirements
Including safety: 293 x 254 in.
Average power consumption (approximate): 9 kW
In standby mode (approximate): 0.7 kW
Main Supply: 460V/60Hz
Connected Load: 32 kVA
Control Voltage: 24 V=
Air Supply: 95 P.S.I.
Equipped With
SheetMaster Compact.
With the use of seal kits leaks from the front of back of the cylinder can be stopped. The replacementf of the seals can either be done in house or can be sent to !st Machine Tool Accessories for replacement by one of our technicians.