<p>
The combined turning and grinding center VSC 400DS combines the advantages of<br/>
vertical hard turning with the advantages of grinding, on a single machine, in<br/>
<br/>
a single set-up. The turning and grinding center VSC 400DS is equipped with<br/>
<br/>
turning, drilling and grinding modules.<br/>
<br/>
As on all machines of the VSC series, the pick up principle ensures that the <br/>
EMAG REINECKER VSC 400DS turning and grinding center loads itself. There is<br/>
<br/>
consequently no need for cost intensive, space devouring gantry loaders or<br/>
<br/>
other loading devices that necessitate time consuming resetting work.<br/>
<br/>
* Vertical hard turning and finish grinding in a single setup, on a single<br/>
<br/>
machine.<br/>
* All workpiece sections that can be turned with the required process <br/>
<br/>
reliability are hard finish turned and only ground (after hard pre-turning)<br/>
<br/>
where component quality and process reliability demand.<br/>
* A better quality component and increased productivity levels, because the<br/>
<br/>
workpiece is machined in a single setup, and the hard turning process leaves<br/>
<br/>
a small amount of material to be ground away in the subsequent operation.<br/>
<br/>
<br/>
The turning and grinding center VSC 400DS is specifically designed for the low<br/>
<br/>
cost, process capable, precision machining of medium to large component<br/>
<br/>
batches. Typical examples of such workpiece are: gearwheels, chain wheels,<br/>
<br/>
sliding sleeves, parts CVTs, link pins, conrods, rocker arms, bearing rings<br/>
<br/>
and piston rings.<br/>
<br/>
EQUIPPED WITH:<br/>
<br/>
Siemen 840D Control<br/>
Coolant System<br/>
Mayfran Chip Conveyor<br/>
Chiller<br/>
Auto Load Table<br/>
480/3/60 Cycle Electrics<br/>
<br/>
SPECIFICATIONS:<br/>
<br/>
Chuck Diameter: 400 mm<br/>
Swing Diameter: 420 mm<br/>
Max. Workpiece Diameter: 340mm<br/>
X-Axis Travel: 850 mm<br/>
Y-Axis Travel: 315mm<br/>
Z-Axis Travel: 315 mm<br/>
Spindle Speed, Max: 3000 RPM<br/>
Spindle Bearing, Front: 120 in/mm<br/>
Rapid Traverse Speed X/Z: 45/30 m/min<br/>
Turning Tools/Life Tools: 1-12<br/>
Approximate Weight: 22,000#<br/>
<br/>
<br/>
</p>.
Table: 300 x 160mm.Max. working height: 280mm.Wheel ?: 178mm.Max. grinding capacity: 330 x 140mm.Wheel motor power: 2,2Kw.Total weight: 0,4Tons.Notes: COMPLETE WITH:- MAGNETIC TABLE
Manufacturer: RJHInformation: Ideal for linishing or deburring flat components in a wide range of materialsCapacity:: 120mmMain Motor:: 1.8kwSupply Voltage:: 400/3/50Approx Weight:: 120kg
Table: 930 x 200mm.Max. working height: 340mm.Wheel ?: 200mm.Max. grinding capacity: 800 x 200mm.Wheel motor power: 5Kw.Total weight: 1,4Tons.Notes: COMPLETE WITH:- MAGNETIC PLATE 810 x 200 MM.